Click here for product information pb rohs_mat rohs_comp  msds

Planar Cores (9595110502*)

Part Number: 9595110502
95 ER CORE SET
95 Material
Inductive Components
Closed Magnetic Circuit
Printer Friendly Data Sheet
Check Stock

Part Number: 9595110502

95 ER CORE SET

Planar EE and EI cores, with their low profile are suitable for board level installation allowing assembly without the need for plastic coilformers and can also allow windings integrated into multi-level PCBs. Planar ER cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications.

-Planar EE, ER and EI cores can be supplied with the center post gapped to a mechanical dimension, or an AL value.

Catalog Drawing
3D Model

Weight: 1 (g)

Dimmmmm tolnominal inchinch misc.
A10.8± 0.300.425_
B2.45± 0.150.096_
C5.9± 0.200.232_
D1.58± 0.160.062_
E8.85± 0.300.348_
F4.15± 0.200.163_
G7.9min0.312min

Chart Legend
Σl/A  :  Core Constant,    le :  Effective Path Length,    Ae :  Effective Cross-Sectional Area,    Ve :  Effective Core Volume
AL :  Inductance Factor  
Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade.

Electrical Properties
AL(nH)1600 ±25%
Ae(cm2)0.126
Σl/A(cm-1)11.2
le(cm)1.4
Ve(cm3)0.177
Amin(cm2)0.103

AL value is measured at 1 kHz, B < 10 gauss.

A low loss MnZn ferrite material for power applications up to 200 kHz with low temperature variation. New type of 95 material is a low loss power material which features less power loss variation over temperature (25-100°C) at moderate flux densities for operation below 200 kHz.

Available in 95 material:

Pot Cores

RM

PQ

EFD

EP

95 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 3000
Flux Density @ Field Strength Gauss
Oersted
B
H
5000
5
Residual Flux Density Gauss Br 1200
Coercive Force Oersted Hc 0.18
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 2.5
0.1
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C 0.6
Curie Temperature °C Tc >220
Resistivity Ohm-cm ρ 200

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download Complex Permeability vs. Frequency (CSV)

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

* Non-standard part. May have longer lead time, higher price, and higher minimum order quantity.
Go to Top