Click here for product information pb rohs_mat rohs_comp  msds

Planar Cores (9367060002)

Part Number: 9367060002
67 Plate- I18/2/10
67 Material
Inductive Components
Closed Magnetic Circuit
Printer Friendly Data Sheet
Check Stock

Part Number: 9367060002

67 Plate- I18/2/10

Planar EQ and EQI cores, with their low profile, are suitable for board level installation allowing assembly without the need for plastic coilformers and can also allow windings integrated into multi-level PCBs. Planar EQ cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications.

– Planar EQ and EQI cores can be supplied with the center post gapped to a mechanical dimension, or an AL value.

Catalog Drawing
3D Model

Weight: 1.96 (g)

Dimmmmm tolnominal inchinch misc.
A18.00± 0.350.709_
C10.00± 0.20.394_
G2.00 ± 0.10.079_

Chart Legend
Σl/A  :  Core Constant,    le :  Effective Path Length,    Ae :  Effective Cross-Sectional Area,    Ve :  Effective Core Volume
AL :  Inductance Factor  
Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade.

Electrical Properties
AL(nH)78 Min
Ae(cm2)39.5
Σl/A(cm-1)0.514
le(cm)20.3
Ve(cm3)802
Amin(cm2).709

AL value is measured at 1 kHz, B < 10 gauss.

9367060002 is mated with 9467222002.

A high frequency NiZn ferrite intended for broadband transformers. Antennas and Hi Q inductor applications up 50MHz. Excellent stability characteristics.

Strong magnetic fields or excessive mechanical stresses may result in irreversible changes in permeability or losses.

Available in 67 material:
Multi-Aperture Beads
Rods
Toroids
Application Specific Custom Components

67 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 40
Flux Density @ Field Strength Gauss
Oersted
B
H
2300
20
Residual Flux Density Gauss Br 1000
Coercive Force Oersted Hc 3
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 180
50
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C 0.05
Curie Temperature °C Tc >450
Resistivity ohm-cm ρ 1×107

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download the data for 67 Material Power Loss vs. Temperature (see graph below)

Click here to download 67 Material Power Loss Density vs. Flux Density at 25°C  (see graph below)

Click here to download 67 Material Power Loss Density vs. Flux Density at 100°C (see graph below)

Click here to download 67 Material Complex Permeability vs. Frequency (see graph below)

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

Go to Top