Planar Cores (9361059002*)
61 Plate- I14/1.5/5
61 Material™
Inductive Components
Closed Magnetic Circuit
Printer Friendly Data Sheet
Check Stock
Part Number: 9361059002
61 Plate- I14/1.5/5
Planar EQ and EQI cores, with their low profile, are suitable for board level installation allowing assembly without the need for plastic coilformers and can also allow windings integrated into multi-level PCBs. Planar EQ cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications.
– Planar EQ and EQI cores can be supplied with the center post gapped to a mechanical dimension, or an AL value.
Weight: .68 (g)
Dim | mm | mm tol | nominal inch | inch misc. |
A | 14.00 | ± 0.30 | 0.551 | _ |
C | 5.00 | ± 0.1 | 0.197 | _ |
G | 1.50 | _ | 0.059 |
Chart Legend
Σl/A : Core Constant, le : Effective Path Length, Ae : Effective Cross-Sectional Area, Ve : Effective Core Volume
AL : Inductance Factor
Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade.
Electrical Properties | |
AL(nH) | 98 Min |
Ae(cm2) | 14.5 |
Σl/A(cm-1) | 1.152 |
le(cm) | 16.7 |
Ve(cm3) | 242 |
Amin(cm2) | .551 |
AL value is measured at 1 kHz, B < 10 gauss.
9361059002 is mated with 9461221002.
A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics.
Strong magnetic fields or excessive mechanical stresses may result in irreversible changes in permeability and losses.
Available in 61 material™:
EMI Suppression Beads
Beads On Leads
SM beads
Wound Beads
Multi-Aperture Cores
Round Cable Snap-Its
Toroids
Rods
Antenna/RFID
Rods
Round EMI Suppression Cores
61 Material™ Characteristics
Property | Unit | Symbol | Value |
Initial Permeability @ B < 10 gauss | µi | 125 | |
Flux Density @ Field Strength | Gauss Oersted |
B H |
2500 15 |
Residual Flux Density | Gauss | Br | 1000 |
Coercive Force | Oersted | Hc | 1.2 |
Loss Factor @ Frequency | 10 -6 MHz |
Tan δ/ µi | 90 10 |
Temperature Coefficient of Initial Permeability (20 -70°C) | %/°C | .10 | |
Curie Temperature | °C | Tc | >300 |
Resistivity | ohm-cm | ρ | 1×108 |
**** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.
Material Safety Data Sheet (MSDS)
Click here to download Complex Permeability vs. Frequency (CSV)
Click here to download 61 Material Power Loss Density vs. Flux Density at 25°C
Ferrite Material Constants
Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file