Click here for product information pb rohs_mat rohs_comp  msds

Ferrite Plate (3596000501)

Part Number: 3596000501
96 PLATE
96 Material
Power Components

Printer Friendly Data Sheet
Catalog Drawing
3D Model
Check Stock

Part Number: 3596000501

96 PLATE

Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade

The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material.

For any connector EMI suppression plate requirement not listed here, feel free to contact our customer service group for availability and pricing.

Catalog Drawing
3D Model

The A + B dimension can be modified to suit specific applications.

Weight: (g)

Dimmmmm tolnominal inchinch misc.
A100.00 +/- 2.5+/- 2.53.937_
B 100.00 +/- 2.5+/- 2.5 3.937_
C3.00 +/- 0.25+/- 0.250.118_

Chart Legend
+ Test frequency

Ferrite plates are controlled for Inductance up to 20 Amps.

Inductance values are specified at 85 kHz.

Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns.

Catalog Drawing

 

CSV Download

A low loss MnZn ferrite for power applications up to 500kHz demonstrating minimal power loss over a wide extended temperature range.

Available in 96 material:

Custom Parts

96 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 3300
Flux Density @ Field Strength Gauss
Oersted
B
H
5000
5
Residual Flux Density Gauss Br 650
Coercive Force Oersted Hc .11
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 5
0.1
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C 0.2
Curie Temperature °C Tc >215
Resistivity ohm-cm ρ 200

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download Complex Permeability vs. Frequency (CSV)









Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

Go to Top