EFD Cores (8998303021*)
98 EFD CORE SET
98 Material
Inductive Components
Closed Magnetic Circuit
Printer Friendly Data Sheet
Catalog Drawing
3D Model
Check Stock
Part Number: 8998303021
98 EFD CORE SET
EFD (Economical Flat Design) cores have been designed to maximize volume in a low profile geometry. EFD cores allow maximum throughput power density with reasonably low mass for board level installation.
EFD cores can be supplied with the center post gapped to a mechanical dimension or an ALvalue.
Weight indicated is per pair or set.
Weight: 24 (g)
| Dim | mm | mm tol | nominal inch | inch misc. |
| A | 30 | ± 0.80 | 1.181 | _ |
| B | 15 | ± 0.25 | 0.591 | _ |
| C | 9.1 | ± 0.30 | 0.358 | _ |
| D | 11.2 | ± 0.30 | 0.441 | _ |
| E | 22.4 | ± 0.75 | 0.882 | _ |
| F | 14.6 | ± 0.30 | 0.575 | _ |
| K | 4.9 | ± 0.20 | 0.193 | _ |
Chart Legend
Σl/A : Core Constant, le : Effective Path Length, Ae : Effective Cross-Sectional Area, Ve : Effective Core Volume
AL : Inductance Factor 
Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade.
| Electrical Properties | |
| AL(nH) | 2150 ±25% |
| Ae(cm2) | 0.69 |
| Σl/A(cm-1) | 11.3 |
| le(cm) | 6.93 |
| Ve(cm3) | 4.26 |
| Amin(cm2) | 0.66 |
AL value is measured at 1 kHz, B < 10 gauss.
A low loss MnZn ferrite material for power applications up to 200 kHz.
New type of 98 material is an improved version of Fair-Rite’s 78 material. This material supplies lower power loss at 100°C at moderate flux densities for operation below 200 kHz.
Available in 98 material:
E&I Cores
Pot Cores
RM
PQ
ETD
EFD
EP
EER
Planar Shapes
98 Material Characteristics
| Property | Unit | Symbol | Value |
| Initial Permeability @ B < 10 gauss | µi | 2400 | |
| Flux Density @ Field Strength | Gauss Oersted |
B H |
5000 5 |
| Residual Flux Density | Gauss | Br | 2000 |
| Coercive Force | Oersted | Hc | 0.17 |
| Loss Factor @ Frequency | 10 -6 MHz |
Tan δ/ µi | 3 0.1 |
| Temperature Coefficient of Initial Permeability (20 -70°C) | %/°C | 1.5 | |
| Curie Temperature | °C | Tc | >215 |
| Resistivity | Ohm-cm | ρ | 200 |
**** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.
Material Safety Data Sheet (MSDS)
Click here to download Complex Permeability vs. Frequency (CSV)
Ferrite Material Constants
Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file