Connector EMI Suppression Plates (2644247001)
Part Number: 2644247001
44 MULTI-HOLE PLATE
Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = The 44 Material Grade
To provide suppression of conducted EMI at critical interfaces Fair-Rite has available a line of suppression plates that can be used with many types of connectors. All connector plates are supplied in the NiZn 44 grade ideally suited for this application because of its high impedance along with a high resistivity.
For any connector EMI suppression plate requirement not listed here, feel free to contact our customer service group for availability and pricing.
The C dimension can be modified to suit specific applications.
Weight: 0.37 (g)
|Dim||mm||mm tol||nominal inch||inch misc.|
|# Holes||# Rows|
|Typical Impedance (Ω)|
Connector plates are controlled for impedances only.
Minimum impedance values are specified for the + marked frequencies.
The minimum impedance is listed on our catalog drawing.
Single turn impedance tests are performed on the E4990A Impedance Analyzer, using the shortest practical wire length.
|Typical Impendance (Ω)|
A NiZn ferrite developed to combine a high suppression performance, from 30 MHz to 500 MHz, with a very high DC resistivity.
Available in 44 material:
Round Cable Snap-Its
Connector EMI Suppression Plates
44 Material Characteristics
|Initial Permeability@ B < 10 gauss||µi||500|
|Flux Density @ Field Strength||Gauss
|Residual Flux Density||Gauss||Br||1100|
|Loss Factor @ Frequency||10 -6
|Tan δ/ µi||150
|Temperature Coefficient of Initial Permeability (20 -70°C)||% / °C||1.6|
**** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.