Chip Beads (2508051217Z0)
MULTI-LAYER CHIP BEAD
Chip Bead
Suppression Components
Board Component
Printer Friendly Data Sheet
Check Stock
Part Number: 2508051217Z0
MULTI-LAYER CHIP BEAD
Fair-Rite offers a broad selection of cost effective multi-layer chip beads to suppress conducted EMI signals. Chip beads can be used in an array of devices such as cellular phones, computers, laptops, pagers, etc. The small package sizes accommodate automated placements and allow for a dense packaging of circuit boards.
Chip Beads are available in standard, high and GHz signal speeds.
Packaging Options:
-All multi-layer chip beads are supplied taped and reeled, if required bulk packed chip beads can be provided.
Recommended storage and operating temperature is -55ºC to +125ºC.
The suggested land patterns are in accordance to the latest revision of IPC-7351.
Weight: 0.01 (g)
Package Size: 0805 (2012)
Dim | mm | mm tol | nominal inch | inch misc. |
A | 0.9 | ±0.20 | 0.035 | _ |
B | 1.25 | ±0.20 | 0.049 | _ |
C | 2 | ±0.20 | 0.079 | _ |
D | 0.5 | ±0.30 | 0.02 | _ |
Land Patterns | ||||
V | W | X | Y | Z |
0.60 (0.024”) | 1.90 (0.075”) | 1.50 (0.059”) | 1.30 (0.051”) | _ |
Reel Information | ||||
Tape Width mm | Pitch mm | Parts 7" Reel | Parts 13" Reel | Parts 14" Reel |
8 | 4 | 4000 | 10000 | _ |
Chart Legend
+ Test frequency
Typical Impedance (Ω) | |
50 MHz | 48 |
100 MHz+ | 120 ±25% |
500 MHz | 260 |
1000 MHz+ | - |
Electrical Properties | |
Max DCR (Ω) | 0.2 |
Max Current (mA) | 300 |
The impedance values listed are typical values. The nominal impedance with a +/- 25% tolerance is specified for the + marked 100 MHz. Chip beads are measured for impedance on the HP 4291A and fixture HP 16192A.
Chip beads are 100% tested for impedance and dc resistance.
Typical Impendance (Ω) | |
50 MHz | 45 |
100 MHz+ | 120 ±25% |
500 MHz | 253 |
1000 MHz+ | – |
Ferrite Material Constants
Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file