Antenna/RFID Rods (3061990891)
61 ROD
61 Material™
Inductive Components
Open Magnetic Circuit
Printer Friendly Data Sheet
Check Stock
Part Number: 3061990891
61 ROD
Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade
– The last digit 1 = Uncoated Rod and 4 = Parylene Coated Rod. Parylene C is RoHS compliant.
These rods are designed for use in antenna and RFID transponder applications. Rods are available in three materials to cover a frequency range from 50 kHz to 25 MHz. Suggested frequency ranges: 78 material < 200 kHz, 61 material 0.2 – 5.0 MHz and 67 material > 5.0 MHz.
The “Antenna/RFID Kit” (part number 0199000024) contains a selection of these rods.
For any rod requirement not listed here, feel free to contact our customer service group for availability and pricing.
Weight: 3.3 (g)
Dim | mm | mm tol | nominal inch | inch misc. |
A | 5 | ±0.04 | 0.197 | _ |
C | 35 | ±0.80 | 1.378 | _ |
Electrical Properties | |
μROD | 24 |
Ae(cm2) | 0.196 |
A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics.
Strong magnetic fields or excessive mechanical stresses may result in irreversible changes in permeability and losses.
Available in 61 material™:
EMI Suppression Beads
Beads On Leads
SM beads
Wound Beads
Multi-Aperture Cores
Round Cable Snap-Its
Toroids
Rods
Antenna/RFID
Rods
Round EMI Suppression Cores
61 Material™ Characteristics
Property | Unit | Symbol | Value |
Initial Permeability @ B < 10 gauss | µi | 125 | |
Flux Density @ Field Strength | Gauss Oersted |
B H |
2500 15 |
Residual Flux Density | Gauss | Br | 1000 |
Coercive Force | Oersted | Hc | 1.2 |
Loss Factor @ Frequency | 10 -6 MHz |
Tan δ/ µi | 90 10 |
Temperature Coefficient of Initial Permeability (20 -70°C) | %/°C | .10 | |
Curie Temperature | °C | Tc | >300 |
Resistivity | ohm-cm | ρ | 1×108 |
**** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.
Material Safety Data Sheet (MSDS)
Click here to download Complex Permeability vs. Frequency (CSV)
Click here to download 61 Material Power Loss Density vs. Flux Density at 25°C
Ferrite Material Constants
Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file