Reference Tables

FERRITE MATERIAL CONSTANTS
Specific Heat : 0.25 cal/g/°C
Thermal Conductivity : 35 – 43 mW/cm – °C
Coefficient of Linear Expansion : 8 – 10×10-6/°C
Tensile Strength : 4.9 kgƒ/mm2
Compressive Strength : 42 kgƒ/mm2
Young’s Modulus : 15×103
kgƒ/mm2
Hardness (Knoop) : 650
Specific Gravity : ≈ 4.7
*The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.

PROPERTIES OF PARYLENE C COATING MATERIAL
Dielectric Strength : 5600 V/mil
Volume Resistivity : 8.8×1016 ohm-cm
Surface Resistivity : 1014 ohm
Dielectric Constant (1MHz) : 2.95
Dissipation Factor (1MHz) : 0.013
Density : 1.29 g/cm3
Water Absorption (24 hrs) : <0.1 %
Coefficient of Friction : 0.29
Continuous Operating Temperature : <100 °C
Thermal Conductivity : 2.0×10-4 cal/sec/cm/°C
Maximum Operating Temperature : <160 °C

CONVERSION TABLE

SI Units CGS Units
1 T (Tesla) = 1 Vs/m2 = 104 gauss
1 mT = 10 gauss
1 A/m = 10-2 A/cm = 0.0125 oersted
0.1 mT = 1 gauss
80 A/m = 1 oersted

GREEK ALPHABET

A, α : Alpha N, ν : Nu
B, β : Beta Ξ, ξ : Xi
Γ, γ : Gamma O, o : Omicron
Δ, δ : Delta Π, π : Pi
E, ε : Epsilon P, ρ : Rho
Z, ζ : Zeta Σ, σ : Sigma
H, η : Eta T, τ : Tau
Θ, θ : Theta Y, υ : Upsilon
I, ι : Iota Φ, φ : Phi
K, κ : Kappa X, χ : Chi
Λ, λ : Lambda Ψ, ψ : Psi
M, μ : Mu Ω, ω : Omega

Can’t find what you’re looking for?

At Fair Rite, we design, prototype and manufacture ferrite component exactly to your specifications.
Fill out the form below and we will contact you right away!

Name(Required)
This field is for validation purposes and should be left unchanged.

Or Call Us at 1-888-FAIRRITE

DESIGN
DEVELOP
DELIVER