Bobbins (9643001165)Part Number: 9643001165
43 BOBBIN GROUND
Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade
– Last digit 8 = Coated Bobbin
Bobbins are an economical and well-proven core design for many applications where relatively low but stable inductance values are required.
For higher frequency designs, use small bobbins in 43 material® .
For power applications, bobbins in 77 material are specified for AL and dc bias limits.
Bobbins in Figures 2-5 can be supplied with a uniform thermo-set plastic coating which can withstand a minimum breakdown of 500Vrms. This coating will change the dimensions a maximum of 0.5 mm (0.020″). The last digit of the thermo-set plastic coated part is an “8”.
For any bobbin requirement not listed in the catalog, please contact our customer service group for availability and pricing.
Weight: 1.3 (g)
| Dim | mm | mm tol | nominal inch | inch misc. |
| A | 5.05 | -0.15 | 0.196 | _ |
| B | 12.7 | ±0.25 | 0.5 | _ |
| D | 10 | +0.30 | 0.4 | _ |
| F | 2.70 | +0.07 | 0.106 | _ |
| G | 0.5 | ±0.10 | 0.02 | _ |
| H | 1 | +0.14 | 0.042 | _ |
Chart Legend
AL : Inductance Factor 
, Nl : Value of dc Ampere-turns, AW:Winding Area,
N/AWG : Number of Turns/Wire Size for Test Coil
| Electrical Properties | |
| AL(nH) | 17.5 ±10% |
| N/AWG | 30/24 |
| Aw(cm2) | 0.12 |
Bobbins are tested for AL value at 1kHz < 10 gauss.