Product Data Sheet Generated June 25, 2026
fair-rite.com

Flat Cable Snap-It™ (0431163951)

Part No. 0431163951

Part Number

0431163951

Description

31 FLAT CABLE CORE ASSEMBLY

Part Type

Flat Cable Snap-It™

Frequency Range

31 Material®

Application Type

Suppression Components

Where Used

Cable Component

Material Grade

Ordering Information

Part Number: 0431163951

31 FLAT CABLE CORE ASSEMBLY

Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade

Flat Cable Snap-It™ for use on multi-conductor flat cables to suppress common-mode conducted EMI from 1MHz to hundreds of MHz. These Flat Cable Snap-It™ are available in two ferrite materials, 31 and 43. The polypropylene cases are meeting the RoHS restrictions of hazardous substances and have a flammability rating of UL 94 V-0.

The Expanded Cable and Suppressor Kit (Part number 0199000005) contains several Flat Cable Snap-It™ assemblies.

Mechanical Specifications

Weight: 110 (g)

Chart Legend
•Dimensions (Top numbers are in millimeters, bottom numbers are in nominal inches.).

Dim	mm	mm tol	nominal inch	inch misc.
A	68.0	+/- 2.00	2.677	_
B	51.00	_	2.008	_
C	32.5	+/- 1.5	1.28	_
D	7.90	+/- 0.5	0.311	_

Electrical Specifications

Chart Legend
+ Test frequency

Typical Impedance (Ω)
1 MHz	16
5 MHz	45
10 MHz+	58
25 MHz+	95
100 MHz+	215
250 MHz	356

Flat Cable Snap-It™ assemblies are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%.

Centered, single turn impedance tests on the 31 and 43 material parts are performed on the E4991A/HP4291B Impedance Analyzer. Cores are tested with the shortest practical wire length.

Typical Impendance (Ω)
1 MHz	13
5 MHz	35
10 MHz⁺	54
25 MHz⁺	105
100 MHz⁺	300
250 MHz	425

CSV Download

This document was generated automatically from Fair-Rite's product database. For the most current specifications, visit fair-rite.com.